Separators
Separators are used to settle two immiscible liquids with different densities. When this mixture of liquids is allowed to settle , two separate layers are formed. Mixture of liquid is continuously feeded in separator at low velocity. This allow sufficient residence time for the formation of separating layers. Light phase liquid is continuously removed from light phase outlet at the top. The Heavy phase liquid enters through dip pipe at lower end and over flows in the discharge pipe and is removed from the bottom outlet.
Separator can be provided with adjustable overflow valve, (Type B) to adjust position of inter face for different operating situations. Separator can also be constructed with horizontal cylindrical vessel and to provide larger-separating surface. (Cat Ref. HSPS Or HSPA).
| Nominal Cap. | DN | Inlet DN1 | DN2 | Heavy Phase Outlet DN3 | Drain DN4 | Light Phase Outlet DN5 | Vent DN6 | L | L1 | L2 | L3 | Type | Reference |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| 20 L | 80 | 25 | 50 | 25 | 25 | 25 | 25 | 800 | 125 | 525 | - | A | SFSPS 20 |
| 50 L | 100 | 40 | 50 | 25 | 25 | 40 | 40 | 1025 | 150 | 725 | - | A | SFSPS 50 |
| 100 L | 150 | 40 | 50 | 25 | 25 | 40 | 40 | 1175 | 200 | 825 | - | A | SFSPS 100 |
| 200 L | 225 | 40 | 50 | 25 | 25 | 40 | 40 | 1475 | 250 | 1075 | - | A | SFSPS 200 |
| 20 L | 80 | 25 | 50 | 25 | 25 | 25 | 25 | 1000 | 125 | 525 | 200 | B | SFSPA 20 |
| 50 L | 100 | 40 | 50 | 25 | 25 | 40 | 40 | 1225 | 150 | 725 | 200 | B | SFSPA 50 |
| 100 L | 150 | 40 | 50 | 25 | 25 | 40 | 40 | 1375 | 200 | 825 | 200 | B | SFSPA 100 |
| 200 L | 225 | 40 | 50 | 25 | 25 | 40 | 40 | 1675 | 250 | 1075 | 200 | B | SFSPA 200 |
